Courses

Heat Transfer (Värmeöverföring) MTF115

Undergraduate level

Engineering Fluid-Structure Interaction: Technologies and Practices (TRA270)

Combined undergraduate & graduate level

Fluid-Structure Interaction: Modelling, Simulations and Applications

Doctoral level

Doctoral students
  1. 2024-, Lucile Naudat
  2. 2023-, Stephan van Reen
  3. 2021-, Xinyuan Shao (co-supervisor)
  4. 2021-2024, Heng Zhu 
  5. 2019-, Stefan Nilsson (industry doctoral student with Dr. Sebastian Arvidson, Saab AB)
  6. 2019-2021, Josefin Borgede (former Andersson)
  7. 2017-2022, Martin Ottersten (industry doctoral student with Prof. Lars Davidson, Swegon, co-supervisor)
CSC joint doctoral students
  1. 2025-2026, Yang Liu
  2. 2025-2026, Yang Yi
  3. 2022-2023, Zhiyi Yuan
  4. 2021-2022, Junkai Huang 
  5. 2021-2022, Jian-Feng Lin 
Post-doc
  1. 2025-, 
  2. 2022-2024, Martin Otterson
  3. 2022-2024, Mohammad Hossein Arabnejad Khanouki
  4. 2022-2023, Massoud Tatar
  5. 2020-2023, Xiao Xue
  6. 2019-2021, Xin Zhao
  7. 2019-2022, Zhongjie Huang
  8. 2018-2020, Guglielmo Minelli
  9. 2017-2019, Sahan Wasala
Reseachers
  1. 2025-, Heng Zhu
  2. 2022-2023, Wei Na 
  3. 2022-2022, Rameez Badhurshah
  4. 2021-2022, Xin Zhao
Research assistants
  1. 2025-2025, Zhaoyue Xu
  2. 2025-2025, Berken Serbülent
  3. 2025-2025, Chenya Ji
  4. 2021-2023, Philip van Hoorn
  5. 2021-2022, Aravindhan Venkatesh
  6. 2019-2020, Xiaojian Li
Master's theses
  1. Axel Larsson and Sunil Rangaswamy, Thermal Modelling of Heat Transfer Between Ambient Air and Powerpack. Chalmers University of Technology, 2023.
  2. Rohith Virinchi Maddila, Investigation of the effect of Thermal Interface Materials on cooling of Battery Cells. Chalmers University of Technology, 2023.
  3. Sreeharsha Bikkireddy, Fluid-Structure interaction analysis: Aeroelasticity of telescopic wing sails for wind-assisted ship propulsion. Chalmers University of Technology, 2022. 
  4. Niranjan Nithyanandam, CFD modelling of frosting behavior in the evaporator of a heat pump. Chalmers University of Technology, 2022
  5. Aran Mahmoud & Hussein al-Debismain, Development of general hydrodynamic modelling method for whiplash nerve injury Using high-fidelity data from the ViVA+ human body model. Chalmers University of Technology, 2022. 
  6. Ali Burak Asci, Design and Simulation of Electric Rim-Driven Hubless Propeller, Istanbul Technical University Gümüşsuyu/Istanbul, Erasmus+, 2022.
  7. Adrià Hueso Carro, High-Fidelity Simulation of Installation Effects of UHBPR Engine Nacelles for Long-Range Aircraft, Polytechnic University of Catalonia, Erasmus+, 2022
  8. Jason Ebenezer John Jawahar Edwin, Analysis of FSI effects for a novel WEC using high-fidelity simulations, Chalmers University of Technology, 2022. 
  9. Philip van Hoorn, High-Performance Sailing Aerodynamics: An Investigation of the International Moth Class, Department of Mechanics and Maritime Sciences, Chalmers University of Technology, 2021. 
  10. Shreyas Vijayendra Kumar, Fluid Flow and Magnet Simulation in a Gearbox, Department of Mechanics and Maritime Sciences, Chalmers University of Technology, 2021. 
  11. Xinyuan Shao, Computational Fluid Dynamics of Wind Power Using Lattice-Boltzmann Method on GPUs, Department of Mechanics and Maritime Sciences, Chalmers University of Technology, 2021
  12. Nora Kronvall and Sara Strand, Optimisation of Battery Thermal Management System: A comparative CFD study on possible improvements of heat transfer within a vehicle battery, Chalmers University of Technology, 2020.
  13. Ali Ghadiani, Aerodynamics and Aeroacoustics of Sail Masts, University of Bologna, 2019.
  14. Omar Fares, Numerical Investigation of Noise Generation by Automotive Cooling Fans, Chalmers University of Technology, 2019.
  15. Barlev Raymond Nagawkar, Numerical Study of Aeroacoustic Sources Generated from the Wake Behind the Car, Chalmers University of Technology, 2016.
Bachelor's theses
  1. Mohamed Hadi Haidari, Felix Hövik, Caspian Lago, Fredrik Nyström Lindé, Jacob Sjöberg, Low-Noise Propeller Design for Future Electric Aircraft: A Numerical Study on Propeller Efficiency and Noise Emissions, Chalmers University of Technology, 2020. 
  2. Jesper Hellsberg, Samuel Holgersson, Henrik Larsson, Jonatan Odengård, Utveckling av simuleringsprogram för Quadcopter-drönare, Chalmers University of Technology, 2018.  
Internship reports
  1. Liam Ayache and Thomas Dubos, Noise Impact on UAM logistics, Department of Mechanics and Maritime Sciences, Chalmers University of Technology, 2022. 
  2. Antoine Vintache, Towards a Sailing Performance Improvement System via Image Analysis, Department of Mechanics and Maritime Sciences, Chalmers University of Technology, 2021. 
  3. Maxence Drouin, Validation of High-Fidelity CFD Methods for Weapon Bay Aerodynamics and Aeroacoustics, Department of Mechanics and Maritime Sciences, Chalmers University of Technology, 2021
Course project reports
  1. Cristóbal Ibáñez, Richard Palm, Ramin Rahani, Xinyuan Shao, CFD Investigation of a Generic Vehicle Side-View Mirror, TME131 Project in Applied Mechanics, Chalmers University of Technology, 2020. 
  2. John Borenius, Tobias Bredenberg, Nicholas Otway, Marcus Ringström, Björn Wallin, Analysis, Design and Build of RC Composite Flying Wing, TME131 Project in Applied Mechanics, Chalmers University of Technology, 2019. (Presentation link)
  3. Anandh Ramesh Babu, Implementation of Aeroacoustic Solver for Weakly Compressible Flows, PhD course: CFD with OpenSource Software, Chalmers University of Technology, 2018.
  4. Janathan Fahlbeck, Johan Forsgren, Sankar Raju Narayanasamy, Martin Ottosson, David Winqvist, Investigation of Wind-Induced Noise to Optimize Masts, TME131 Project in Applied Mechanics, Chalmers University of Technology, 2017.